The available air filters are as follows:
| Construction | Double Skin |
|---|---|
| Capacity | 2000 CFM to 1,25,000 CFM. With single blower |
| Pressure | 30 mmwg to 80 mmwg. |
| Blower | AASTHA Make or any other make as per choice. Backward / forward curved with single or double with FRP lining if required. |
| Cooling Media | Cooling Coil. |
An air handling unit, also known as an AHU, is made up of components installed in sizable, easily accessible box-shaped units called modules. These modules include the necessary ventilation components for cleaning, cooling, or replenishing the indoor air in a building or location. They are often mounted on the roof of buildings, and air is circulated to all of the building's rooms by ducts.
1. The air will be clean because of the air purification filters and control over the air quality that enters the interior, and depending on how long the filters are retained.
2. Control of the air temperature that manages the air conditioning system in cold or hot conditions, ensuring the desired thermal experience inside.
3. For improved interior comfort, monitors therelative humidity.
Use of air handling units
The AHU, on the other hand, is designed for spaces like hotel dining rooms, conference halls, restaurants, and that have restricted natural ventilation due to their high volume of simultaneous visitors. It is also a good solution for locations with strict hygiene regulations, such clean rooms, operating rooms, and labs. AHUs can also be utilised to ventilate rooms that,have heated floors or radiators for air conditioning. The only function of an air handling unit is to clean and maintain outside air and circulate it as fresh air within a building. These equipment are frequently located on the top, in the basement, or on the floors in a particular region of medium to big industrial and commercial buildings.
Energy efficiency of air handling units
Energy efficiency is the primary goal of an air handling unit, and as of 2016, the European Ecodesign has made this mandatory. As interior and outside air are mixed in the exchanger before entering the coil, the temperature difference is lower when the air reaches it, resulting in a lower environmental impact and less energy consumption. As a result, the AHU uses less energy than is needed for air conditioning.
Air Handling unit- Air handling units’ condition and distribute air within a building Fresh outdoor atmospheric air is taken in, cleaned, heated or cooled, and perhaps humidified before being sent through ductwork to the designated regions inside a structure. The used unclean air from the rooms will then be pulled out of the majority of units and returned to the AHU, where a fan will release it back into the atmosphere. Some of this return air back into the fresh air supply. Some buildings, especially old high-rise buildings, will only have one large AHU, which is usually located on the roof. The entire building will be supplied by them. Some older systems rely on the air just leaking out of the building and may not even have a return duct. Aastha enviro is the best air handling unit supplier. Aastha enviro is the leading industrial air handling unit manufacturers. Aastha enviro is the finest air handling unit manufacturers. Aastha enviro is the top air handling unit manufacturers.
